제품구성(규격 및 색상)

- 6ml, 100 Tips

제품용도

- 컴포지트 실러

제품특징

- 모든 Light(할로겐 & LED)에 광중합
- 컴포지트면의 미세면을 실링하여 컴포지트 수복물의 수명연장을 해줌
- 탁월한 광택성 및 심미성을 부여해줌
- 습기면에 더욱 효과적으로 실링됨
- Margin Free, No Solvent, No Yellow Tint
- Tooth Integration 및 No Microleakage
- 마진 스테인, White Line를 제거
- 최종 Finishing 및 Polishing단계를 없애주어 진료시간을 획기적으로 단축

사용방법

1. Enamel & Composite에 적용시 : 10초간 에칭 또는 microabrasion 실행한다.
Ceramic에 적용시 : Microabrasion 또는 포세린 에칭을 2분간 실행한다.
2. 세척 및 약간 건조시킨다.(완전 건조 시키지 않음)
3. Seal-n-Shine 적용 후 20초간 광중합 한다.



*INSTRUCTIONS FOR USE
Dry ceramic, metal and cured resin surfaces. Leave prepared tooth surface slightly moist. Slightly moist tooth surfaces exhibit neither dryness nor pooling of water. Lightly dry and remove excess water with compressed air or a cotton pellet. Tooth surfaces should be shiny or glossy. Overly wet surfaces will result in decreased bond strength.

1. For enamel and composite, etch or microabrade for 10 seconds. For ceramic surfaces, place rubber dam and etch with Pulpdent Porcelain Etch Gel for 2 minutes. Pulpdent Kool-Dam should be used to protect soft tissue, teeth or porcelain surfaces, as required.
2. Rinse well. Dry ceramic, metal and cured resin surfaces. Lightly dry enamel and leave prepared tooth surface slightly moist.
3. When necessary, place dental floss through the contacts and leave it in the embrasures. Use later to clear contacts and prevent bonding to adjacent tooth surfaces. The teeth can be wedged and a mylar strip can be placed, if desired.
4. Apply a thin coat of Seal-n-Shine to the etched tooth and restorative surfaces with a flocked dispenser tip or a clean brush.
5. Remove the dental floss by lifting interproximally through the contacts. It is important for the contacts to be open.
6. Light cure. Seal-n-Shine cures with all lights. Curing time for a halogen light with a minimum of 300 mW/cm2 is 20 seconds. More powerful lights will cure faster.

*Caution
Uncured material may cause eye or skin irritation on contact. Dental professionals should wear safety glasses and surgical gloves.